Technical data

DTC
DTC setting
The permissible slip on the rear
wheel is controlled by the DTC
system according to the selected
riding mode.
In SLICK mode, the DTC setting
by the system can be additionally
adjusted.
Adopting the DTC
function
Activate the SLICK mode
and insert the coding plug as
needed.
The DTC can be adjusted
in SLICK mode only.
The DTC can also be ad-
justed while riding.
Press upper button 1 (+) in
order to set earlier DTC con-
trol (with less slip on the rear
wheel).
A value between 1 and 7 can
be adjusted, where 7 corre-
sponds to the earliest interven-
tion.
The set value 1 is shown in the
display.
Danger of falling due to
slipping rear wheel. The re-
duction in DTC control can cause
spinning of the rear wheel and
thus stability loss.
Reduce DTC control on race
tracks only.
Press lower button 1 (-) in or-
der to set later DTC control
(with more slip on the rear
wheel).
A value between -1 and -7 can
be adjusted, where -7 corre-
6
92
z On the racetrack