Technical data

Setting parameter
Press and hold button 2 until
displayed parameter begins to
flash.
Press button 1 or button 2 re-
peatedly until desired value is
displayed.
If desired value is displayed:
Press and hold button 2 un-
til displayed value no longer
flashes.
The value has been saved.
Exiting settings
Press and hold button 1 until
multifunction display switches
over to ROAD mode.
A value which is still flashing
will not be saved.
As an alternative, press but-
ton 1 or button 2 repeatedly
until SETUP RETURN is dis-
played.
If "SETUP RETURN" is
displayed:
Press and hold button 2 to exit
SETUP mode.
SETUP MENU is indicated.
Adjusting rear damping
Rebound stage damping adjust-
ment on the rear spring strut.
6
84
z On the racetrack