Technical data

Rotate the adjusting screw 1
into the desired position by
applying gentle pressure from
the rear.
The adjusting screw can
be turned more easily if
you press the handbrake lever
forward when doing so.
Adjustment options:
from Position 1: largest dis-
tance between handlebar grip
and brake lever
up to Position 6: smallest dis-
tance between handlebar grip
and brake lever
with competition kit
OE
Rotate adjusting screw 2 in
the direction of A in order to
increase the distance between
handlebar grip and handbrake
lever.
Rotate adjusting screw 2 in
the direction of B in order to
decrease the distance between
handlebar grip and handbrake
lever.
The adjusting screw can
be turned more easily if
you press the handbrake lever
forward when doing so.
Adjusting footbrake lever
with competition kit
OE
Make sure ground is level and
firm and park motorcycle.
Remove screw 1.
Position foot piece 2 in desired
position and install screw 1
with specified torque.
Foot piece on foot pedal
7 lb/ft (10 Nm)
4
46
z Operation