Technical data

maintained, even after the igni-
tion is switched off.
In SLICK mode the current DTC
fine tuning setting 5 is shown as
well.
Adopting the DTC function
( 92).
Installing coding plug
When the coding plug is
used, the operating permit
for public roads is voided.
Do not use the encoding plug on
public roads.
Switch off ignition.
Removing driver's seat ( 53).
Dirt and moisture can get
into the open plug and
cause malfunctions.
After removing the encoding
plug, refit the cover cap.
Open cable ties and remove
cover cap of the plug connec-
tion 1.
To do so, press the locking
device 2 down and pull off the
cap by pulling it upwards.
Insert the coding plug.
Switch on ignition and secure
plug connection using a new
cable tie.
4
44
z Operation