Technical data

Removing the seat humb cover
( 51).
with passenger package
OE
Removing passenger seat
( 52).
Press together locking lever
and remove cover of fuse
box 1.
To replace main fuse, remove
cover 2 from relay box.
Use the tool from the on-board
toolkit to pull the defective fuse
up and out of the fuse box.
If the fuses blow frequently,
have the electrical system
checked by an authorized spe-
cialized workshop, preferably a
BMW Motorrad retailer.
Installing fuse
Replace defective fuse with
fuse with required amperage.
An overview of the fuse as-
signment and the required
amperages is provided in the
chapter "Technical Data". The
numbers in the graphic match
the fuse numbers.
Close fuse cover.
Locking device audibly en-
gages.
Installing the seat humb cover
( 52).
with passenger package
OE
Installing passenger seat
( 53).
Jump-starting
The wires leading to the
power socket do not have
a load-capacity rating adequate
for jump-starting the engine. Ex-
cessively high current can lead
to a cable fire or damage to the
vehicle electronics.
Do not use the socket to
jump-start the engine of the
motorcycle.
Touching live parts of the
ignition system with the
engine running can cause electric
shock.
Do not touch parts of the igni-
9
151
z Maintenance