Technical data

Replacing license plate
light
Pull license-plate light 1 out of
lamp housing.
Pull bulb out of socket.
Replace defective bulb.
Bulb for license-plate
light
W5W / 12 V / 5 W
To prevent contaminants from
being deposited on the new
bulb's glass surface, always use
a clean, dry cloth to hold it.
Press bulb into socket.
Press license-plate lamp 1 into
lamp housing.
Fuses
Removing fuse
If defective fuses are
bridged, this results in a
danger of short-circuit and thus a
danger of fire.
Replace defective fuses with new
fuses.
Switch off ignition.
Make sure ground is level and
firm and park motorcycle.
9
150
z Maintenance