Technical data

Turn in the bracket 2 with the
long sides facing the outside.
Adjust the mounting pieces 3
to the width of the pins
inserted into the rear wheel
swing arm.
Adjust the height of the rear
wheel stand so that the rear
wheel is lifted slightly off the
ground.
Attach the rear wheel stand to
the rear wheel swing arm and
press it on the ground evenly.
Lamps
Replacing low-beam and
high-beam bulbs
The alignment of the con-
nector may differ from the
illustration depending on the bulb
to be replaced.
Make sure ground is level and
firm and park motorcycle.
Switch off ignition.
Remove the cover 1 to replace
the low-beam bulb.
Remove the cover 2 to replace
the high-beam bulb.
9
144
z Maintenance