Technical data

Position the wind deflection
wing 2 ensuring that is on the
correct side.
The letters "R" for the right
side and "L" for the left side
are stamped on the surfaces of
the deflector panels.
Install screws 1.
Installing front turn signal
Make sure ground is level and
firm and park motorcycle.
Unfasten the screws 1 then
remove the wind deflection
wing 2.
Remove the screw 1 on the
inside of the right side panel.
Remove screws 2.
Remove screws 3 with wash-
ers.
Pull fairing side panel out of
rubber buffer at position 4 and
remove.
Guide cable through fairing
side panel.
6
105
z On the racetrack