Technical data

Removing and installing
front turn indicator
Removing front turn
signal
The working steps de-
scribed here for the right
fairing side panel also apply logi-
cally for the left side.
Removing fairing side panel
( 129).
Unclip the turn signal cable at
position 1.
Undo the screw 2 and remove
the turn signal. Guide cable
through fairing side panel.
Protect connector on motorcy-
cle against contamination.
Mount fairing side panel in
mount 6 on engine spoiler.
Mount side panel in rubber
buffer at position 4.
Install screws 3 with washers.
Install screws 2.
Install screw 1.
6
104
z On the racetrack