Technical data

Adjusting rebound-stage
damping for rear wheel
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
Adjust the rebound-stage
damping by turning knob 1.
If you want to reduce rebound-
stage damping, turn knob 1 in
direction a.
If you want to increase
rebound-stage damping, turn
knob 1 in direction b.
Rebound stage, basic
setting, rear
Adjust damping by turn-
ing bottom knob to fully
tightened position, then back
it off 16 clicks. (Motorcycle
with full load of fuel, with
rider 85 kg)
Adjusting compression-
stage damping for rear
wheel
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
Adjust the compression-stage
damping by turning knob 1.
5
76
z Operation