Technical data

If you want to increase damp-
ing, turn knob 1 in direction H.
If you want to reduce damping,
turn knob 1 in direction S.
Rebound stage, basic
setting, front
Adjust damping by turning
top knob to fully tightened
position, then back it off 8
clicks. (Motorcycle with full
load of fuel, with rider 85 kg)
Adjusting compression-
stage damping for front
wheel
Your motorcycle's hand-
ling will suffer if you do not
match the spring-preload and
damping-characteristic settings.
Adjust the damping characteristic
to suit spring preload.
Adjust the damping by turning
knob 1. The knob is behind
the side panel and accessible
from below.
If you want to increase damp-
ing, turn knob 1 in direction H.
If you want to reduce damping,
turn knob 1 in direction S.
Compression stage, basic
setting, front
Adjust damping by turn-
ing bottom knob to fully
tightened position, then back
it off 14 clicks. (Motorcycle
with full load of fuel, with
rider 85 kg)
5
75
z Operation