Technical data

To turn the adjusting rings:
use tool 3 from the on-board
toolkit to counter-hold and
tool 4 to turn the ring. Make
sure that hooks a are each se-
curely engaged in a recess.
Slacken the lock by tightening
adjusting ring 1 in direction b
with the tool from the toolkit,
while counter-holding adjusting
ring 2.
Take all weight off the front
wheel.
Measure distance d between
top edge of top fork bridge 5
and top edge of bottom fork
bridge 6.
Apply the rider's weight to the
motorcycle.
With the assistance of a
second person, measure
distance d between points 5
and 6 again and calculate the
difference between the two
readings.
5
70
z Operation