Technical data

Adjusting spring preload
for front wheel
Remove screws 1 on left and
right.
Work the cover of the fuel tank
to the rear to remove.
Remove screw 1 from the in-
take air pipe.
Disengage both retainers 2 by
pressing at rear and remove.
Remove the intake air pipe.
Your motorcycle's hand-
ling will suffer if you do not
match the spring-preload and
damping-characteristic settings.
Adjust the damping characteristic
to suit spring preload.
Use adjusting rings 1 and 2 to
adjust spring preload.
5
69
z Operation