Technical data

Press MENU button 2 once.
The cursor is to the left of the
SET field.
Press SET button 1.
Brightness increases each time
you press the button, as indic-
ated by the number of filled
boxes. The LEDs are off if all
the boxes are empty.
Adjusting backlight
Select SETUP mode.
You can make this adjust-
ment only when the motor-
cycle is at a standstill.
Press MENU button 2 once.
The cursor is to the left of the
SELECT field.
Repeatedly press SET but-
ton 1 until
Backlight ap-
pears on the display.
4
52
z Instrument panel