Technical data

The first LED lights up and the
rpm threshold for upshifting is
shown (in this example LED 1
lights up at 5200 rpm).
Press SET button 1 once for
each step.
Each time you press the button
the next LED lights up and the
corresponding rpm threshold
for upshifting is shown.
Repeatedly press the SET but-
ton until the LED you want
lights up.
The number of the active LED
is shown at position 1.
Press and hold down the SET
button until thousands digit 2
flashes.
Repeatedly press SET button
until the number you want is
shown.
Press and hold down the SET
button until hundreds num-
ber 3 flashes.
Repeatedly press SET button
until the number you want is
shown.
4
44
z Instrument panel