Technical data

ing which the readout remains
visible appears on the display.
Each time you press the but-
ton the time increases by five
seconds: the range is from 0
to 30 seconds.
Setting upshift indicator
Select SETUP mode.
You can make this adjust-
ment only when the motor-
cycle is at a standstill.
Press MENU button 2 once.
The cursor is to the left of the
SELECT field.
Repeatedly press SET but-
ton 1 until
Flash Adjust
appears on the display.
Press MENU button 2 once.
The cursor is to the left of the
SET field.
4
43
z Instrument panel