Technical data

Connect battery negative
lead 5.
Route cable of diagnosis
plug 1 underneath the battery
holder. Hold battery holder 4 in
position and install screw 3.
Seat plug 2 in its holder and
connect it.
Seat diagnosis plug 1 in the
holder.
Engage end of Bowden
cable 4 in the relay pulley.
Connect plug 3.
Hold the control unit in position
and install screws 2.
Press the Bowden cable into
holder 1.
The Bowden cable engages
with an audible click.
Install the seat ( 83)
Set the clock ( 50)
10
148
z Maintenance