Technical data

Make sure the ground is level
and firm and place the motor-
cycle on its stand.
Switch off the ignition.
Turn the handlebars to the full-
lock position.
Unlatch cover 1 for high-beam
headlight at position a and re-
move.
Unlatch cover 2 for low-beam
headlight at position b and re-
move.
Disconnect plug 3.
Disengage spring clips 4 from
the fastenings and swing them
aside.
Remove bulb 5.
Replace the defective bulb.
Bulb for low-beam head-
light
H7/12V/55W
Bulb for high-beam
headlight
H7/12V/55W
Install bulb 5, making sure that
tab 6 is correctly positioned.
The bulb might face in a
direction other than that
shown here.
10
140
z Maintenance