Technical data

with BMW Motorrad ABS
OE
Insert the ABS sensor into its
bore and install screw 1.
Remove the front-wheel and
rear-wheel stands.
Ease the brake calipers on to
the brake discs.
Install securing screws 1 on
left and right and tighten to
specified tightening torque.
Radially mounted brake
caliper to slider tube
30 Nm
Remove the adhesive tape
from the wheel rim.
Braking efficiency is im-
paired if the brake pads are
not correctly bedded against the
discs.
Before riding off, always check
that the brakes bite as soon as
the brake lever is pulled or the
brake pedal depressed.
Operate the brake several
times until the brake pads are
bedded.
with BMW Motorrad ABS
OE
Close the retaining clips hold-
ing the ABS sensor cable to
the brake line.
The cable of the ABS
sensor could chafe through
if it comes into contact with the
brake disc.
Make sure that the ABS sensor
cable is routed correctly.
10
134
z Maintenance