Operation Manual

Pull bulb socket 1 out of the
headlight housing.
Remove the bulb from the
socket.
Replace the defective bulb.
Bulb for parking light
W5W / 12 V / 5 W
Use a clean, dry cloth to hold
the new bulb in order to keep
the glass free of foreign matter.
Insert the bulb into the socket.
Install bulb socket 1 in the
headlight housing.
Install the instrument panel as
described above.
Replacing bulbs for front
and rear turn indicators
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
Switch off the ignition.
8
88
z Maintenance