Operation Manual

Remove screw 1 and work the
instrument panel up and out of
its holders.
Lay the instrument panel aside.
Switch off the ignition.
Disconnect plug 1, counter-
holding the bulb under the rub-
ber cap.
Remove rubber cap 2.
Disengage spring clip 3 from
the latches and swing it up.
Remove bulb 4.
Replace the defective bulb.
Bulb for low-beam and
high-beam headlight
H4 / 12 V / 55 W / 60 W
Hold the new bulb by the base
only, in order to keep the glass
free of foreign matter.
8
86
z Maintenance