Operation Manual

Nut on quick-release axle
(rear wheel)
100 Nm
Checking chain wear
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
Accelerated wear.
If a component of the
sprocket with mounting parts is
found to be worn, the entire set
has to be replaced.
Pull the chain back at the rear-
most point of the sprocket.
The tips of the sprocket teeth
must remain inside the chain
links.
If the chain can be pulled back
far enough to expose the tips of
the sprocket teeth:
Consult a specialist workshop,
preferably an authorised BMW
Motorrad dealer.
Wheels
Checking rims
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
Visually inspect the rims for
defects.
Have damaged rims checked
and, if necessary, replaced by a
specialist workshop, preferably
an authorised BMW Motorrad
dealer.
Checking spokes
with spoked wheel
OE
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
Draw the handle of a screw-
driver or a similar instrument
across the spokes and listen
to the notes of the individual
spokes.
If the notes vary:
Have the spokes checked by a
specialist workshop, preferably
an authorised BMW Motorrad
dealer.
Checking tyre tread depth
Your motorcycle's handling
and grip can be impaired
even before the tyres wear to
the minimum tyre tread depth
permitted by law.
Have the tyres changed in good
time before they wear to the
8
75
z Maintenance