Operation Manual

Connect plug 1.
Replacing turn indicator
bulbs, front and rear
If it is not standing firmly,
the motorcycle could topple
in the course of the operations
described below.
Always make sure that the
motorcycle is stable and firmly
supported.
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
Remove screw 1.
Pull the glass out of the reflect-
or housing at the threaded-
fastener side.
Press bulb 2 into its socket
and turn it counter-clockwise to
remove.
Replace the defective bulb.
Bulbs for flashing turn
indicators, front
R10W / 12 V / 10 W
Bulbs for flashing turn
indicators, rear
R10W / 12 V / 10 W
8
89
z Maintenance