Operation Manual

Hold the rear-wheel cover
in position and install three
screws 2.
Install two screws 1.
BMW Motorrad front-
wheel stand
Installing front-wheel
stand
without centre stand
OE
Place the motorcycle on a suit-
able auxiliary stand.
with centre stand
OE
Make sure the ground is level
and firm and place the motor-
cycle on its centre stand.
The BMW Motorrad front
wheel stand is not designed
to support motorcycles not fitted
with a centre stand or without
other auxiliary stands. A motor-
cycle resting only on the front
wheel stand and the rear wheel
can topple.
Place the motorcycle on its
centre stand or another auxiliary
stand before lifting the front
wheel with the BMW Motorrad
front-wheel stand.
Use the front-wheel stand with
the number (0 402 240).
Slacken adjusting screws 1 of
the front-wheel stand.
Push the two adapters 2 apart
until the front forks fit between
them.
Use locating pins 3 to set the
front-wheel stand to the de-
sired height.
8
83
z Maintenance