Operation Manual

The front wheel must be
installed right way round to
rotate in the correct direction.
Note the direction-of-rotation ar-
rows on the tyre or the wheel
rim.
Roll the front wheel into posi-
tion between the forks, making
sure that the brake disc passes
between the brake pads.
Raise the front wheel, insert
axle 3 and tighten to specified
torque.
Fastener, quick-release
axle, front
45 Nm
Remove the front-wheel stand.
Apply the front brake and firmly
compress the front forks sever-
al times
Tighten axle clamping screw 2
to the specified torque.
Clamp, front quick-re-
lease axle
23 Nm
Insert the ABS sensor into its
bore and install screw 1.
without centre stand
OE
Remove the auxiliary stand.
Removing rear wheel
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
8
79
z Maintenance