Operation Manual

Remove screw 1 and remove
the ABS sensor from its bore.
Raise front of motorcycle until
the front wheel can turn freely.
BMW Motorrad recommends
the BMW Motorrad front-wheel
stand for lifting the motorcycle.
Install the front-wheel stand
( 83).
Release axle clamping screw 2.
Remove axle 3; support the
wheel while doing so.
Do not remove the grease from
the axle.
Roll the front wheel forward to
remove.
Remove spacing bushings 4
and 5 from the wheel hub.
Installing front wheel
Slip spacing bushings 5 and 4
onto the wheel hub.
8
78
z Maintenance