Operation Manual

Clutch
Checking clutch-lever
play
Pull the clutch lever until resist-
ance is perceptible.
Measure clutch-lever play a.
Clutch, play at handlebar
lever
1...2 mm
Clutch-lever play is out of toler-
ance:
Adjust the clutch-lever play
( 74).
Adjusting clutch-lever
play
Push back boot 1.
Slacken locknut 2.
Set clutch-lever play to spe-
cification by turning adjusting
screw 3.
Turning clockwise: increases
play.
Turning counter-clockwise: re-
duces play.
Check the clutch-lever play
( 74).
Tighten locknut 2.
Pull boot 1 back over the ad-
justing screw.
Tyres
Checking tyre tread depth
Your motorcycle's handling
and grip can be impaired
even before the tyres wear to
the minimum tyre tread depth
permitted by law.
Have the tyres changed in good
time before they wear to the
minimum permissible tread
depth.
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
Measure the tyre tread depth
in the main tread grooves with
wear marks.
Tyres have wear indicators
integrated into the main
tread grooves. The tyre is worn
out when the tyre tread has worn
down to the level of the marks.
The locations of the marks are
indicated on the edge of the tyre,
8
74
z Maintenance