Operation Manual

Adjusting case volume
Open the case.
Remove all its contents from
the case.
Disengage all four latching
levers 1 and open them.
Adjust the case to the desired
volume by sliding the outer
casing of the case all the way
in or out.
The latching levers cannot
be closed unless the outer
casing of the case is set to one
or other of the two limit stops.
Close and lock all four latching
levers 1.
Close the case.
Removing cases
To unlock, turn key 1 in the
case lock to right angles with
the forward direction of travel.
Hold down release lever 2 (yel-
low) and pull up carry handle 3.
Pull release lever 4 (red) up.
Latching flap 5 pops up.
Fully open the latching flap.
Take a firm grip of the handle
and lift the case out of the
holder.
7
61
z Accessories