User Guide

11.19
•
Use pliers, BMW No. 17 5 500, to open the
clamp securing the breather hose at the cylinder
head cover.
•
Remove cylinder head cover (1).
•
Remove spark plug.
•
Remove centre screw plug in engine block cov-
er, right.
L Note:
TDC position: marks on the timing-chain sprockets
are parallel with the cylinder head, the bores in the
timing-chain sprockets are at the top.
•
Turn crankshaft to TDC position with an Allen
key.
L Note:
Watch out for escaping oil and catch it in a suitable
container.
•
Remove screw (2) close to the oil feed stub pipe
and install locking screw, BMW No. 11 6 570, to
prevent the crankshaft from turning.
K14110030
2
1