User Guide

33.9
•
Press in the inner needle roller races with drift,
BMWNo.331541, and drift,
BMWNo.331542.
•
Fit bearing bushes into swinging arm.
•
Place protective caps in position.
Removing and installing needle bear-
ings in rear swinging arm
Removing needle roller bearing
•
Remove bearing bushing (1) from swinging arm.
•
Lever out the sealing rings with a screwdriver.
e Attention:
Protect mating faces (arrow) of the swinging arm
from scratches by covering with masking tape or
similar.
•
Press needle bearing out of rear swinging arm
with drift, BMW No. 33 6 620.
33 6 651
B
33 6 652
K14330130
33 1 541
33 1 542
K14330012
1
K14330170
33 6 620