User Guide

33.8
33 17 373
Removing and installing nee-
dle roller races in rear swinging arm
Removing needle roller races
•
Remove protective caps (1).
•
Remove bearing bushings (2) from swinging arm.
e Attention:
Protect mating faces (arrow) of the swinging arm
from scratches by covering with masking tape or
similar.
•
Drive needle roller races out of rear swinging arm
with drift, BMWNo.336661.
Installing needle roller races
e Attention:
Install needle roller races with sealing ring to the
outside.
•
Heat bearing seats to 100 °C (212 °F).
•
Press in the outer needle roller races with drift,
BMW No. 33 1 541.
K14330011
1
1
2
2
K14330110
33 6 661
K14330120
33 1 541