Technical data

Replacing high-beam/low-
beam headlight bulb
If it is not standing firmly,
the motorcycle could topple
in the course of the operations
described below.
Always make sure that the
motorcycle is stable and firmly
supported.
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
Switch off the ignition.
Turn the handlebars to the
left to facilitate access.
Remove cover 2 (low-beam
headlight) or cover 3 (high-
beam headlight) by pulling
lever 1.
Disconnect plug 4.
Disengage spring clips 5 from
the fastenings and swing them
aside.
Remove bulb 6.
Replace the defective bulb.
8
105
z Maintenance