Technical data

Tighten screw 2 for the brack-
et of the silencer in the rear
footrest to the specified torque.
Silencer to rear frame
19 Nm
Remove the auxiliary stand, if
installed beforehand.
Front-wheel stand
Use
A front-wheel stand for simple,
safe changing of the front wheel
is available from BMW Motorrad.
The BMW special tool number
is 36 3 970 and the front-wheel
stand is available from your au-
thorised BMW Motorrad dealer.
The BMW Motorrad front
wheel stand is not designed
to support motorcycles not fitted
with a centre stand or without
other auxiliary stands. A motor-
cycle resting only on the front
wheel stand and the rear wheel
can topple.
Place the motorcycle on its
centre stand or another auxiliary
stand before lifting the front
wheel with the BMW Motorrad
front-wheel stand.
Installing front wheel
stand
Place the motorcycle on an
auxiliary stand; BMW Motorrad
recommends the BMW Motor-
rad rear-wheel stand.
Install the rear-wheel stand
( 103)
with OE Centre stand:
Place the motorcycle on its
centre stand.
Slacken adjusting screws 1.
Push the two adapters 2 apart
until the front forks fit between
them.
8
102
z Maintenance