Technical data

Self-diagnosis not
completed
ABS warning light flashes.
Possible cause:
The ABS function is not
available, because self-
diagnosis did not complete. The
motorcycle has to move forward
a few metres for the wheel
sensors to be tested.
Pull away slowly. Bear in mind
that the ABS function is not
available until self-diagnosis has
completed.
ABS fault
ABS warning light shows.
Possible cause:
The ABS control unit has detec-
ted a fault. The ABS function is
not available.
You can continue to ride. Bear
in mind that the ABS function
is not available. Bear in mind
the more detailed information
on situations that can lead to
an ABS fault ( 73).
Have the fault rectified as
quickly as possible by a
specialist workshop, preferably
an authorised BMW Motorrad
dealer.
RDC warnings
with tyre pressure monitoring
(RDC)
OE
Mode of presentation
Warning symbol 1 indicates a
critical tyre pressure, and the cor-
responding reading for the front
tyre pressure 2 or the rear tyre
pressure 3 flashes.
If the critical value is close
to the limit of the permiss-
ible tolerance range, the reading
is accompanied by the 'General'
warning light showing yellow. If
the tyre pressure registered by
the sensor is outside the per-
missible tolerance range, the
'General' warning light shows red.
3
32
z Status indicators