Technical data

Remove screws 1.
Pull the bulb housing to the
rear to remove.
Remove bulb 2.
Replace the defective bulb.
Bulb for tail light/brake
light
P21/5W / 12 V / 5 W / 21 W
Install bulb 2.
Hold the bulb housing in posi-
tion and install screws 1.
Jump starting
The wires leading to the
power socket do not have
a load-capacity rating adequate
for jump-starting the engine. Ex-
cessively high current can lead
to a cable fire or damage to the
vehicle electronics.
Do not use the on-board socket
to jump-start the engine of the
motorcycle.
8
113
z Maintenance