Technical data

Turn bulb 2 counter-clockwise
and remove it from the bulb
housing.
Replace the defective bulb.
Bulbs for flashing turn
indicators, front
R10W / 12 V / 10 W
with white turn indicators
OE
RY10W / 12 V / 10 W
with LED turn indicators
OE
LED / 12 V
Turn bulb 2 clockwise to install
it in the bulb housing.
Working from the inboard side,
insert the glass into the bulb
housing and close the housing.
Install screw 1.
Replacing the brake light
and rear light bulbs
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
Switch off the ignition.
8
112
z Maintenance