Technical data

Roll the rear wheel as far
forward as possible and loop
chain 7 over the sprocket.
Seat left adjusting plate 6 in
the swinging arm and install
quick-release axle 5 in the
brake caliper and the rear
wheel.
Make sure that the axle fits in-
to the recess of the adjusting
plate.
Install right adjusting plate 4.
Install nut 1, but do not tighten
it at this point.
without centre stand
OA
Remove the auxiliary stand.
Insert the speed sensor into
the bore and install screw 1.
Adjust the chain tension
( 99).
Front-wheel stand
Installing front-wheel
stand
The BMW Motorrad front
wheel stand is not designed
to support the motorcycle
without the assistance of an
auxiliary stand. A motorcycle
resting only on the front wheel
8
106
z Maintenance