Operation Manual

Use a plastic-sheathed steel
cable to secure the helmet to
helmet holder 1 on left or right.
ATTENTION
Attachment of the helmet on
the left side of the vehicle.
Damage due to hot rear silencer.
Attach the helmet on the right-
hand side of the vehicle.
ATTENTION
Incorrect positioning of the
helmet lock.
Scratch marks on trim panel.
Make sure the lock is out of
the way when you hook the
helmet into position.
Pass the steel cable through
the helmet and the holder and
position cable and helmet as
shown here.
Installing seat ( 58).
Rider's Manual
Stowing the Rider’s
Manual
Tuck the Rider’s Manual(s) into
the pocket provided.
Make the opening side of the
pocket as narrow as possible,
then fasten the velcro 1.
4
59
z Operation