Operation Manual

To make different adjustment to
the damping:
Repeatedly press button 1 until
the setting you want to use
appears on the display.
NOTICE
You can adjust the damping
characteristic while the motor-
cycle is on the move.
The setting shown on the
display is automatically
accepted as the damping
characteristic if you allow a
certain length of time to pass
without pressing button 1.
The ESA indicator disappears
from the display as soon as
adjustment completes.
Tyres
Checking tyre pressure
WARNING
Incorrect tyre pressure.
Impairment of the motorcycle's
handling characteristics. Shorter
useful tyre life.
Always check that the tyre
pressures are correct.
WARNING
Tendency of valve inserts in-
stalled vertically top open
by themselves at high riding
speeds.
Sudden loss of tyre pressure.
Install valve caps fitted with
rubber sealing rings and tighten
firmly.
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
Check tyre pressures against
the data below.
Tyre pressure, front
2.2 bar (one-up, tyre cold)
2.2 bar (two-up and/or with
luggage, tyre cold)
Tyre pressure, rear
2.5 bar (one-up, tyre cold)
2.9 bar (two-up and/or with
luggage, tyre cold)
If tyre pressure is too low:
Correct tyre pressure.
4
56
z Operation