Operation Manual

ASC fault
with Automatic Stability Control
(ASC)
OE
ASC telltale and warning
light shows.
Possible cause:
The ASC control unit has detec-
ted a fault. The ASC function is
not available.
You can continue to ride. Bear
in mind that the ASC function
is not available. Bear in mind
the more detailed information
on situations that can lead to
an ASC fault ( 90).
Have the fault rectified as
quickly as possible by a
specialist workshop, preferably
an authorised BMW Motorrad
dealer.
Tyre pressure close
to limit of permitted
tolerance
with tyre pressure monitoring
(RDC)
OE
General warning light shows
yellow.
+ "x.x" (critical pressure)
flashes.
Possible cause:
Measured tyre pressure is close
to the limit of permitted toler-
ance.
Correct the tyre pressure as
stated on the inside cover of
the Rider's Manual.
NOTICE
Before you adjust tyre pressure,
read the information on tempera-
ture compensation and adjusting
pressure in the section entitled
"Engineering details".
Tyre pressure outside
permitted tolerance
with tyre pressure monitoring
(RDC)
OE
General warning light
flashes red.
+ "x.x" (critical pressure)
flashes.
Possible cause:
Measured tyre pressure is out-
side permitted tolerance.
Check the tyre for damage
and to ascertain whether the
vehicle can be ridden with the
tyre in its present condition.
If the vehicle can be ridden with
the tyre in its present condition:
WARNING
Tyre pressure outside per-
mitted tolerance.
Impairment of the vehicle's hand-
ling characteristics.
3
36
z Status indicators