Operation Manual

Removing battery
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
with alarm system (DWA)
OE
If applicable, switch off the anti-
theft alarm.
Switch off the ignition.
ATTENTION
Battery not disconnected in
accordance with correct pro-
cedure.
Risk of short-circuit
Always proceed in compliance
with the specified disconnec-
tion sequence.
Disconnect negative lead 1
first.
Then disconnect positive
lead 2.
Remove the screws 3 on left
and right and pull the batter
holder forward, away from the
battery.
Lift the battery up and out;
work it slightly back and forth
if it is difficult to remove.
Removing battery
Removing seat ( 58).
Removing centre trim panel
( 129).
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
with alarm system (DWA)
OE
If applicable, switch off the anti-
theft alarm.
Switch off the ignition.
ATTENTION
Battery not disconnected in
accordance with correct pro-
cedure.
Risk of short-circuit
Always proceed in compliance
with the specified disconnec-
tion sequence.
Disconnect negative lead 1
first.
Then disconnect positive
lead 2.
9
135
z Maintenance