Operation Manual

Adjust chain sag ( 114).
Front-wheel stand
Install the front-wheel
stand
ATTENTION
Use of the BMW Motorrad
front wheel stand without
also accompanying use of
auxiliary stand.
Risk of damage to parts if vehicle
topples.
Place the motorcycle on an
auxiliary stand before lifting
the front wheel with the
BMW Motorrad front-wheel
stand.
Place the motorcycle on a suit-
able auxiliary stand.
with centre stand
OE
Place the motorcycle on its
centre stand.
Use basic stand (83 30 0 402
241) with front-wheel adapter
(83 30 0 402 242).
Slacken securing screws 1.
Push the two adapters 2 apart
until the front forks fit between
them. Adjust the adapter studs
to suit the front suspension.
Use locating pins 3 to set the
front-wheel stand to the de-
sired height.
Centre the front-wheel stand
relative to the front wheel and
push it against the front axle.
Align the two adapters 2 so
that the front forks are securely
seated.
Tighten securing screws 1.
9
123
z Maintenance