Operation Manual

Raise the front wheel, insert
axle 2 and tighten to specified
torque.
Quick-release axle, front,
in axle holder
30 Nm
Remove the front-wheel stand.
without centre stand
OE
Remove the auxiliary stand.
Ease the right brake caliper
onto the brake disc.
Tighten screws 2 to the spe-
cified tightening torque.
Brake caliper to tele-
scopic fork
38 Nm
Insert the ABS sensor into its
bore and install screw 1.
Remove the adhesive tape
from the wheel rim.
Operate the brake several
times until the brake pads are
bedded.
Firmly compress the front forks
several times.
9
119
z Maintenance