Operation Manual

Remove screws 2 from the
right brake caliper.
Force the brake pads 3 slightly
apart by rocking brake caliper 4
back and forth against brake
disc 5.
Mask off the parts of the wheel
rim that could be scratched in
the process of removing the
brake caliper.
ATTENTION
Brake pads pushed together
with brake caliper removed.
It is not possible to slip the brake
caliper over the brake disc.
Do not operate the brake lever
while a brake caliper has been
removed.
Carefully pull the brake caliper
back and out until clear of the
brake disc.
Place the motorcycle on a suit-
able auxiliary stand.
with centre stand
OE
Make sure the ground is level
and firm and place the motor-
cycle on its centre stand.
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
Raise front of motorcycle until
the front wheel can turn freely.
BMW Motorrad recommends
the BMW Motorrad front-wheel
stand for lifting the motorcycle.
Install the front-wheel stand
( 123).
Remove right-hand axle clamp-
ing screw 1.
Remove axle 2, while support-
ing the wheel.
9
117
z Maintenance