Operation Manual

If the brake fluid level drops be-
low the permitted level:
Have the defect rectified as
quickly as possible by a spe-
cialist workshop, preferably
an authorised BMW Motorrad
dealer.
Coolant
Checking coolant level
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
Check the coolant level in
expansion tank 1. Viewing
direction: From in front,
between windscreen and right
side panel.
Coolant, specified level
Antifreeze and corrosion inhib-
itor
between MIN and MAX marks
on the expansion tank
If the coolant drops below the
permitted level:
Top up the coolant.
Topping up coolant
Open cap 1 of the expansion
tank.
Using a suitable funnel, top up
with coolant until the level is
correct.
Close the cap of the expansion
tank.
Clutch
Checking clutch function
Pull the clutch lever.
The pressure point must be
clearly perceptible.
9
111
z Maintenance