Operation Manual

met being damaged by the hot
end silencer.
If possible, attach the helmet
on the right-hand side of the
motorcycle.
The helmet catch can
scratch the panelling.
Make sure the lock is out of the
way when you hook the helmet
into position.
Pass the steel cable through
the helmet and the holder and
position cable and helmet as
shown here.
Installing seat ( 58).
Rider's Manual
Stowing the Rider’s
Manual
Tuck the Rider’s Manual(s) into
the pocket provided.
Make the opening side of the
pocket as narrow as possible,
then fasten the velcro 1.
Stowing the pocket in the rear
of the vehicle.
with anti-theft alarm (DWA)
OE
Slightly raise the leads 2.
Push the pocket backwards
underneath the cables and rear
frame strut 3 until the rolled-
up edge of the pocket is below
the rear frame strut.
Remove protective film 4 and
attach the velcro to the pocket
in such a way that it cannot
slide around any further.
4
59
z Operation