Operation Manual

Turn the key to the left in seat
lock 1 and hold it in this pos-
ition while pressing down the
front part of the seat.
Lift seat 2 at the front and re-
lease the key.
Remove the seat and place
it, rubber buffers down, on a
clean surface.
Installing seat
Engage the seat in holders 3.
Firmly press down on the seat
at the front.
The seat engages with an aud-
ible click.
Helmet holder
Securing helmet to
motorcycle
Removing seat ( 57).
Use a plastic-sheathed steel
cable to secure the helmet to
helmet holder 1 on left or right.
If it is attached on the left
side of the motorcycle,
there is a possibility of the hel-
4
58
z Operation