Operation Manual

Press and hold down button 1
until the ASC warning light
changes status.
ASC warning light shows.
Release button 1 within two
seconds.
ASC warning light remains
ON.
The ASC function is deactiv-
ated.
Activate ASC function
Press and hold down button 1
until the ASC warning light
changes status.
ASC warning light goes out;
if self-diagnosis has not
completed it starts flashing.
Release button 1 within two
seconds.
The ASC warning light re-
mains off or continues to
flash.
The ASC function is activated.
You also have the option of
switching the ignition off and
then on again.
An ASC fault has occurred
if the ASC warning light
shows when the motorcycle ac-
celerates to a speed in excess
of 5 km/h after the ignition was
switched off and then on again.
Clutch
Adjusting clutch lever
Attempting to adjust the
clutch lever while riding the
motorcycle can lead to accidents.
Do not attempt to adjust the
clutch lever unless the motor-
cycle is at a standstill.
4
50
z Operation