Operation Manual

specialist workshop, preferably
an authorised BMW Motorrad
dealer.
Tyre pressure close
to limit of permitted
tolerance
with tyre pressure monitoring
(RDC)
OE
General warning light shows
yellow.
+ "x.x" (critical pressure)
flashes.
Possible cause:
Measured tyre pressure is close
to the limit of permitted toler-
ance.
Correct the tyre pressure as
stated on the inside cover of
the Rider's Manual.
Before you adjust tyre pres-
sure, read the information
on temperature compensation
and adjusting pressure in the
section entitled "Engineering
details".
Tyre pressure outside
permitted tolerance
with tyre pressure monitoring
(RDC)
OE
General warning light
flashes red.
+ "x.x" (critical pressure)
flashes.
Possible cause:
Measured tyre pressure is out-
side permitted tolerance.
Check the tyre for damage
and to ascertain whether the
vehicle can be ridden with the
tyre in its present condition.
If the vehicle can be ridden with
the tyre in its present condition:
Out-of-tolerance tyre pres-
sures impair the motor-
cycle's handling characteristics.
Adapt your style of riding
accordingly.
Correct the tyre pressure at the
earliest possible opportunity.
Have the tyre checked for
damage by a specialist
workshop, preferably an
authorised BMW Motorrad
dealer.
If you are unsure whether the
vehicle can be ridden with the
tyre in its present condition:
Do not continue your journey.
Notify the breakdown service.
Have the tyre checked for
damage by a specialist
workshop, preferably an
authorised BMW Motorrad
dealer.
Signal transmission
disrupted
with tyre pressure monitoring
(RDC)
OE
3
36
z Status indicators