Operation Manual

Install screw 1.
Replacing number-plate
light bulbs
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
Switch off the ignition.
Remove screw 1 from the
mudguard cover and remove
the cover.
Pull bulb holder 2 out of the
light carrier.
Pull the bulb out of the bulb
socket.
Replace the defective bulb.
Bulb for number-plate
light
W5W / 12 V / 5 W
Use a clean, dry cloth to hold
the new bulb in order to keep
the glass free of foreign matter.
8
115
z Maintenance